Aerospace And Defence Australia

Sumitube® STS devices allow for the reliable solder termination of a wide variety of coaxial cables as well as pin-to-pin, and wire-to-pin connection applications.

Sumitube® STS solders, strain-relieves, electrically insulates, and mechanically protects splices in a single, quick and easy step.

Sumitube® STS devices with meltable inserts also environmentally seal connections at the same time. Optional preinstalled wire or braid leads further enhance the versatility and number of uses for STS products.

Engineered performance

Made to exacting standards, Sumitube® STS devices use high temperature and fluid resistant crosslinked fluoropolymer heat-shrinkable tubing as the outer sleeve. A precise amount of fluxed solder that is visible through the sleeve eliminates any guesswork and results in perfect uniform solder joints every time. Sealing inserts are specially formulated to melt and flow at the proper time and rate to assure environmentally sealed connections.

The operator simply positions the Sumitube® STS device over the prepared stripped wire or cable and applies heat using a hot air or infrared heating tool. Only a minimal amount of training is required.

Reliable, repeatable, inspectable

Sumitube® STS devices provide solder connections with superior electrical and mechanical characteristics. Finished assemblies all have the same amount of solder and flux making your process more productive and predictable. The transparent outer sleeve makes it simple to visually inspect the solder connection. Splices made with Sumitube® STS are also fully and easily repairable.

Lower installed cost

Higher yields, fast application rates and high reliability means money saved. Simple one piece construction reduces handling and inventory requirements further lowering cost.

Because it is heat-shrinkable, one size of Sumitube® STS can cover multiple wire gauges. The available choices of hot air or infrared as heat sources allows for further flexibility.

Custom design capability

SEIP offers unique custom design capabilities not available anywhere else. We would be happy to review your special needs and provide engineering support to supply solutions to your most challenging applications.

To determine which size terminator best meets your requirements:
1. Determine cable dimensions, either "center strip" or "end strip", using the diagrams at right.
2. Refer to cable dimension table above.

X OR XX = TERMINATOR PART NUMBER

Refer to drawing H-M-1 thru -5 for 83519/1 applications.
Refer to drawing H-ML-1 thru -20 for 83519/2 applications with M22759/32
(irradiated ETFE) preinstalled lead.

STS Drawings (PDF Format)

Low-Temperature Solder Termination Sleeves

With our STS solder devices we roll all that hand labor into one easy step with the precise amount of solder to provide a repetitive highly reliable solder joint in just seconds. The largest single problem in electronic assemblies is solder joints! We will eagerly support you with samples, spec sheets, and other info you may require in regards to these products.

Low-Temperatue STS Brochure

OTHER AVAILABLE STS SERIES

NAS 1744
NAS 1745
NAS 1746
High Temperature Infrared 125°C +
High Temperature Convection 125°C+
Low Temperature Convection 105°C +
STS with Sealing Inserts
STS with Preinstalled Leads
STS with Preinstalled Braid
STS with Coaxial Terminators
STS Splicing Sleeves
STS Wire to Pin Sleeves
Custom parts for specific applications - call +61 7 5549 0077

To view Adobe Acrobat PDF files online, update your Acrobat Reader with the browser plug-in